`


THERE IS NO GOD EXCEPT ALLAH
read:
MALAYSIA Tanah Tumpah Darahku

LOVE MALAYSIA!!!


Friday, March 1, 2013

Letter from the Institute of Engineers, Malaysia


LIFTS ARE DESIGNED TO BE "FAIL-SAFE"
-  Highlighting the basic safety features of lifts 
We refer to the news reports on 20th February 2013 whereby a woman was killed when a lift plunged five floors after its cable snapped in a 10-storey apartment block at the Lumut naval base in Perak.
It is shocking to note that yet another public facility failed to function and killed a woman passenger. We should be thankful the lift was not fully occupied. The loss of a single life is horrible enough. The question that begs to be asked is why did this incident happen? Could we have taken necessary precaution to ensure such incidents do not occur?
The answer is a resounding yes and hinges on a good and committed maintenance programme. For centuries lifts have proven to be effective vertical transportation systems and as engineers we can attest to this.  We also know poor maintenance and even negligence can result in mishaps but we do have preventive measures that can save lives.
Let us take a closer look at the safety features of a lift. Each lift has a minimum of five hoisting cables and in the event one cable snaps the remainder four would ensure safe travel in the lift. So why did all five cables give way simultaneously? This wire rope must be properly installed, aligned and calibrated by an experienced technician to function effectively. Even with the snapped hoisting ropes the free falling lift car would be stopped by the mechanical brakes on the main guide rails as the last line of defence before it slammed on the buffer in the pit. What is baffling is how all these safety features failed to work.
The mechanical and material specialists will be able to give their professional and analytical views on this impulse force which was so powerful that all strands of wire rope failed instantly and all at the same time.
We can definitely speculate that poor maintenance or even no maintenance could be the cause for this incident. The persons assigned to conduct regular maintenance work should provide a definitive explanation on the level of maintenance that has been carried out. The question is whether the quality of maintenance service provided was below par.  Were skilled technicians assigned to carry out maintenance works? Were genuine spare parts used? If the answers are NO, it is only right that the appropriate action in accordance with the relevant regulations be taken against the maintenance supplier.
We also believe that that Department of Occupational Safety and Health (DOSH) should do their part to ensure that only authorised lift vendors are registered as maintenance companies to perform maintenance. We further urge the regulatory agency to oversee all such maintenance companies to ensure only competent and qualified individuals are appointed to carry out all maintenance work and to certify the work done at the site.
We understand that there is a shortage of competent and qualified persons specialising in lift installation and maintenance work. We strongly recommend for DOSH to certify more of such persons under a National Occupational Skill Standard (NOSS).
The IEM hopes that proper investigations will be carried out to determine the cause of the mishap.  If there is a need, the IEM will be pleased to offer its services.  

Ir. Prof. Dr Jeffrey Chiang Choong Luin
Honorary Secretary
THE INSTITUTION OF ENGINEERS, MALAYSIA

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.